WALTON PRIMO F8S FLASH FILE MT6580 FIRMWEAR 100% TESTED ROM

WALTON PRIMO F8S FLASH FILE MT6580 FIRMWEAR 100% TESTED ROM

WALTON PRIMO F8S FIRMWARE 100% TESTED

WALTON PRIMO F8S  FIRMWEAR 100% TESTED 

WALTON PRIMO F8S STOK ROM  100% TESTED

DOWNLOAD

Version: 8.1.0
 Build Date: Tue Jun 12 12:25:31 CST 2018
 Model: Primo F8s
 Brand: WALTON
 Device: Primo_F8s
 Manufacturer: WALTON
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000        
 Start processing nvram
 IMEI[1] from NVRAM: 358929090411776
 IMEI[2] from NVRAM: 358929090411784
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000        
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000        
 Start processing persist ......
 Reading:  BEGIN: 0x1c80000        - LEN: 0x3000000       
 Start processing lk ......
 Start processing boot 
 Start processing recovery 
 Start processing logo ......
 Start processing odmdtbo
 Reading:  BEGIN: 0x7600000        - LEN: 0x1000000       
 Start processing misc2 ......
 Reading:  BEGIN: 0x8600000        - LEN: 0x200000        
 Start processing vendor
 Reading:  BEGIN: 0x9200000        - LEN: 0x12000000      
 Start processing frp ......
 Reading:  BEGIN: 0x1b200000       - LEN: 0x100000        
 Start processing trustzone
 Start processing nvdata ......
 Reading:  BEGIN: 0x1bd00000       - LEN: 0x2000000       
 Start processing secro
 Reading:  BEGIN: 0x20200000       - LEN: 0x600000        
 Start processing system
 Reading:  BEGIN: 0x21000000       - LEN: 0x59000000      
 Saved to : C:\Users\akik\Documents\Android_MTK\firmware_backup\MT6580_EMMC_WALTON_Primo F8s_8_1_0_2019_01_22_11_23)
 Wait untill phone will start charging.

 All done.

 

MT6580_EMMC_WALTON_Primo F8s_8_1_0_2019_01_22_11_23)

FILE NOT FREE

 +8801815571860

+8801705550911

How to Flash :

 1: Download and extract the firmware on your computer.

 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.

 3: Install the USB Drivers (skip if drivers are already installed).

 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.

 5: Connect your Smartphone to the computer using the USB Driver.

 6:Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.

 7: Green Ring will appear at the end of successful Flash.