HUAWEI R11S FLASH FILE 100% TESTED
MT6580__lmkj__HUAWEI__HUAWEI__7.0__ALPS.L1.MP6.V2_AEON6580.WEG.L_P73
HUAWEI R11S FIRMWARE 100% TESTED
HUAWEI R11S STOKE ROM 100% TESTED
DOWNLOAD
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM7)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) TOSIBA 0x303034474530
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 110100303034474530 : 00000000000000
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec480000 [3.692 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM Port (COM11)
Build ID: LMY47I
Display ID: l18v20_txd_s6_qc_en_qhd_v02
Version: 7.0
Build Date: 2017年 12月 06日 星期三 19:02:42 CST
Model: HUAWEI
Brand: lmkj
Device: HUAWEI
Manufacturer: leimin
Region: US
Mediatek Version Release: ALPS.L1.MP6.V2_AEON6580.WEG.L_P73
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 355236065542376
IMEI[2] from NVRAM: 355236065542384
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing logo ......
Start processing frp ......
Reading: BEGIN: 0x4fa0000 - LEN: 0x100000
Start processing nvdata ......
Reading: BEGIN: 0x50a0000 - LEN: 0x2000000
Start processing secro
Reading: BEGIN: 0x9a00000 - LEN: 0x600000
Start processing system
Reading: BEGIN: 0xa800000 - LEN: 0x60000000
Saved to : C:\Users\user\Documents\Android_MTK\firmware_backup\MT6580_EMMC_lmkj_HUAWEI_7_0_ALPS_L1_MP6_V2_AEON6580_WEG_L_P73(2019_01_23_12_58)
Wait untill phone will start charging.
All done.
MT6580__lmkj__HUAWEI__HUAWEI__7.0__ALPS.L1.MP6.V2_AEON6580.WEG.L_P73
FILE NOT FREE
+8801815571860
+8801705550911
How to Flash :
1: Download and extract the firmware on your computer.
2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
3: Install the USB Drivers (skip if drivers are already installed).
4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
5: Connect your Smartphone to the computer using the USB Driver.
6:Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
7: Green Ring will appear at the end of successful Flash.
No comments:
Post a Comment